Hinen#
Configuring a Hinen inverter with GbbOptimizer.
GbbOptimizer mode mapping to Hinen settings#
GbbOptimizer controls the Hinen inverter by setting the appropriate Work Mode and charge/discharge parameters.
| GbbOptimizer operation | Work Mode | Charge/Discharge Enable | Start/End | SOC | Rate | AntiBackflow Enable | AntiBackflow Limit Rate |
|---|---|---|---|---|---|---|---|
| Normal | Self-consumption | No | — | 100% | — | — | — |
| Charge | Time period control | Yes | Yes | Target SOC% | ChargeLimit / (MaxInverterChargeDC or MaxBatteryChargeDC) * 100% | No | — |
| Discharge | Time period control | Yes | Yes | Target SOC% | DischargeLimit / (MaxInverterChargeDC or MaxBatteryChargeDC) * 100% (negative value) | Yes | Same as Rate, but > 0 |
| DisableCharge | Time period control | Yes | Yes | Current SOC | 1% | No | — |
Notes on the Discharge operation#
- The
DischargeLimitvalue corresponds to the “Max GridSetpoint / Discharge (W)” parameter - If the discharge must be slower to last the full hour, the program automatically corrects this value
- AntiBackflow is enabled during discharge to control grid export